Scubapro MK25T EVO S620Ti Titanium With R195 Set

The Scubapro MK25T EVO S620Ti Regulator uses a titanium body MK25 high performance balanced piston first stage and the S620Ti second stage which features a smaller housing design and lightweight titanium valve inlet tube than its predecessor, the S600.

The MK25T is a titanium version of Scubapro's premium first stage featuring a balanced through-flow piston design that is capable of delivering unbelievable gas flow rates. The titanium body is machined from a single block of titanium and is lighter, stronger than the standard version as well as being corrosion resistant. The first stage uses a combination of anti-freeze coatings and components to meet and surpass the requirements for cold water rating without the need to pack the balancing chamber with silicone grease. The MK25T is fitted with four low pressure high flow ports around the outside of a swivelling turret and a fifth port on the end that provides optimal hose routing for technical diving. Two high pressure ports are situated on the main body.

The S620Ti second stage is an evolution of the S600 but features a new titanium valve inlet tube that is lighter and corrosion resistant as well as a smaller housing design that utilises the same diaphragm as the S600 for outstanding performance. The second stage uses a pneumatically balanced valve design for a smooth breathe that can be tailored by adjusting the inhalation effort control knob. There is also a lever to adjust the venturi effect with the housing, allowing it to be switched to Pre-Dive for water entry and reduced risk of freeflow or Dive mode for optimal performance and gas flow to the mouthpiece.

Features

First stage

• Air-balanced flow-through piston in a titanium body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate
• Patented XTIS (Extended thermal Insulating system) thermally insulates the inner mechanism from the environment, improving cold-water resistance by 30% and delaying ice formation in extreme cold-water conditions without compromising breathing performance.
• Key insulation system components are visible in blue
• Spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance
• Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures
• Two opposing high pressure ports allow the first stage to be positioned either up or down
• Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximise hose routing options
• External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily
• DIN version comes with a dual-compound wheel that features an ergo shape and soft grip on a rugged black nylon frame
• Airflow at 200bar: >8500 l/min
• Intermediate pressure: 9.0-9.8 bar

Second Stage

• Air-balanced valve smooths out the inhalation effort at varying depths and supply pressures
• Rugged reinforced techno-polymer case and front cover are able to withstand years of aggressive diving
• Titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
• Uses the S600s large diaphragm inside a compact casing for maximum breathing sensitivity
• User controls include an easy-grip diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA) lever
• Super-flow hose features an oversized bore that allows more air to flow on each inhalation
• Ultra-comfortable compact orthodontic mouthpiece is easy to grip yet doesn't inhibit airflow
• Airflow at 200bar: 1850 l/min

Video

Please note: We cannot ship Scubapro items outside the EMEA - Learn more